ENTHONE 50 SERIES MSDS
Highly alkaline cleaner formulated to saponify fats and oils and remove both soap drawing lubricants and zinc phosphate coatings. The unwetted activator will produce smut-free, active metal surfaces. Description Lesonal Mat clear provides a matt appearance over Lesonal Basecoat SB or may be intermixed with other suitable Lesonal clears to provide various gloss levels, for the protection and durability. Two-component, bright acid zinc process delivers exceptional deposit thickness distribution, high plating speeds and outstanding coverage in deeply recessed areas. The process provides consistent deposit properties over an extended operating life without the use of expensive electrodialysis ED equipment, costly steady state operation bleed and feed or expensive chemical alternatives e. This guide specification is intended for use when specifying More information. Significant cost savings can be realized through increased productivity requiring less labor hours and shorter processing times.
Mild, alkaline cleaner designed to remove buffing compound residue from buffed zinc die castings, brass and copper. Hard drying, clear emulsion wax provides additional corrosion protection and enhanced appearance. A tack-free surface is not always an indicator of cure. If the induction period is not observed, the thinner or flow agent may interfere with the catalyzation process and could effect the final cured properties. Water-based ink utilizes either dyes or pigments in a suspension with. Adhesive Recommendation for Altro Flooring. Potassium chloride zinc plating system designed for use at higher temperature and lower metal ranges than conventional chloride zincs.
Features Controlled flow 20 minute handling strength Duo-Pak cartridge.
The inclusion of activators in the process ensures bright, clean surfaces that enhance adhesion and provide faster, more uniform bright plating.
Heat cure enhances the final cured properties. Technical Precautions and Suggestions 3.
NU-SOURCE, INC. – R – Ink Black Gloss #r W/Cat 9 Hard
Avoid the use of paper or wax coated cups. Start display at page:. Decrease off contact distance 4. Technical Data Sheet Product Group High solids epoxy primer Characteristics Product Information A high solids urethane compatible, Skydrol resistant primer for the exterior of aircraft.
Highly alkaline cleaner formulated to saponify fats and oils and remove both soap drawing lubricants and zinc phosphate coatings. Keep screen flooded with ink when not in use 2. Unlike other powdered acid salts, ACTANE 73 does not form insoluble metal salts on the surface that interfere with the subsequent adhesion of the electroplate. Non-cyanide zinc provides excellent distribution over a broad current density range.
End of pot life 1. Containers should be kept tightly closed after each use to prevent moisture contamination. Understanding and Controlling Cure.
Provides similar characteristics as Catalyst Alkaline cleaner is designed for efficient removal of soils. Features Controlled flow 20 minute handling strength Duo-Pak cartridge More information. Silver-free black chromate conversion coating for zinc-iron and zinc-cobalt-iron alloys. Technical Data Sheet L1. Delivers ductile, level zinc deposits. Insufficient air movement in oven 4. Non-fluoride, acid salt specially formulated for surface activation on a variety of metals prior to plating.
Additions should only be made after the induction period has been observed. However, since the conditions of use are beyond our control, this information is given on the express condition and agreement that Enthone Inc.
Significant cost savings can be realized through increased productivity requiring less labor hours and shorter processing times.
It can be applied over adjustable or removable parts to indicate More information.
Non-foaming, fluoride activator produces an acid solution that replaces most mineral acid pickling and activating solutions used in electroplating, phosphating, and heat treating applications.
It is a specially designed tank lining with More information. Uses include the permanent marking of circuit boards, semiconductor components, connectors, dials, nameplates, edge-lit panels, chassis, glass and thermoplastics.
Suitable for endless, consistent operation with ENfinity Serries State technology. Economical to use, the cyanide-free process eliminates the cost of waste treatment.
ENTHONE 50-SERIES CAT-L-INK Legend Ink
Indoors Outdoors More information. The process has the unique capability to produce deposits within a phosphorus content range of 7. Produces a black conversion coating on rack and barrel plated zinc-iron, zinc-cobalt enthonf zinc-cobalt-iron deposits. Regulatory Affairs Department, P. Used cathodically for brass, and for nickel or steel activation sefies to replate. A tack-free surface is not always an indicator of cure. Delete any section below not relevant to this project; add More information.
Dow Corning Enthone 50 Series CAT-L-INK
Engineered for exclusive use with Enthone’s patented ENfinity platform of extended life electroless mds processes. Provides an initial semi-bright deposit when duplex nickel plating. Cobalt-free process meets the ELV directive to eliminate hexavalent chromates. It cures to a tough, resilient More information. Aubrey Parsons 2 years ago Views: