SETTING CITIZEN NAVIHAWK WATCH

This function can be performed from any mode. This watch has a countdown timer which can be set from 1 to 60 minutes in increments of 1 minute. Then press the M button until the pointer points to “time” TME. Each alarm may be set to a different city if desired. When the alarm sounds it can be turned off by pressing any button. The time on this watch is set by changing the digital display time then transferring the digital time to the hands. Back to NaviHawk Review. The calendar in this watch is set in the digital display.

Each alarm may be set to a different city if desired. The time on this watch is set by changing the digital display time then transferring the digital time to the hands. The desired segment in the digital display, Hours, Minutes, or Seconds will blink indicating that that segment can be set. Zone Setting allows you to change which cities are displayed. When the set time has expired the watch will beep for 5 seconds. This function can be performed from any mode. When the alarm sounds it can be turned off by pressing any button. Refer to the instructions below for directions on how to set this watch.

When the set time has expired the watch will beep for 5 seconds. Zone Setting allows you to change which cities are displayed. When the date is set for any one city all other cities, including UTC are corrected automatically. This watch has a countdown timer which can be set from 1 to 60 minutes in increments of 1 minute.

  WATCH OOKAMI KODOMO NO AME TO YUKI ENGLISH DUB

Zone Setting This watch allows you to display the time and date for up to 30 cities. Special functions of this watch Zone Setting This watch allows you to display the time and date for up to 30 cities. Immediately after performing an All Reset the Zero position of the hands may be set.

How to set Citizen Navihawk 1st Gen. Caliber C300 by Valencia Time Center

Special functions of this watch. Refer to the instructions below for directions on how to set this watch. Back to NaviHawk Review.

Then press the M button until the pointer points to “time” Settig. The year can be set from to JNE – Setting Instructions.

Setting the Time The time on this watch is set by changing the digital display time then transferring the digital time to the hands. Alarm operation and setting are the same for all 3 alarms, only their tones are different.

To change the Zone Settings follow the steps below. This function can be performed from any mode.

All Settong and Zero Positioning. All digital segments will light up. The desired segment in the digital display, Hours, Minutes, or Seconds will blink indicating that that segment can be set. The hands will move to the last remembered “Zero” position. This watch allows you to display the time and date for up to 30 cities. Using the timer This watch has a countdown timer which can be set from 1 to 60 minutes in increments of 1 minute.

  DRAMA PHUPHO AMMA EPISODE 10

The day is automatically set based upon the month, date and year. Back to Main Page.

Citizen NaviHawk setting instructions

The time on this watch is set by changing the digital display time then transferring the digital time to the hands. Each alarm may be set to a different city if desired.

Setting the Calendar The calendar in this watch is set in the digital display. The calendar in this watch is set in the digital display. When the alarm sounds it can be turned off by pressing any button. To set the calendar follow the steps below. At this point the cities to be set may be selected with the A Up or C Down buttons.

To synchronize the watch navihaek with the digital display press both buttons A and C at the same time with the M button pushed in to it’s normal position and the mode hand pointing to “time” TME.