SILVERSTONE RAVEN SERIES RVZ01B REVIEW

The case feet for this orientation doesn’t have adhesive on it, it installs like a puzzle using the ventilation holes as the pattern. It looks like installing the H55 in a push configuration with the fan on the bottom and the radiator attached to the case would actually work well forcing air to be pulled over the motherboard, and giving some additional room to angle the tubing toward the front of the case near the PSU. Before we dig any further into the Raven RVE’s interior space, let’s take a look at its exterior. Here’s what the assembly looks like It wraps completely around the PSU, but its channel is extremely tight. On top of the power supply bay is a single 3.

To remove it, you’ll need to pull four small screws from the exterior of the other side panel. You may unsubscribe from the newsletters at any time. Then install the graphics card into the module. TechSpot Account Sign up for free , it takes 30 seconds. The rear of the Silverstone RVZ01 has a lot of ventilation holes. The case is capable of sitting in tower mode, thanks to attachable feet, or it can sit horizontally on rubber bumpers. This newsletter may contain advertising, deals, or affiliate links. A white box containing the accessories and screws are inside the graphics card bay which you need to open.

We’ve seen the trend regarding small form factor desktops and it certainly getting more popular for different purposes like LAN parties, eSports, portable workstations and others.

The case has a matte black finish, which typically is good for avoiding finger marks. Discuss in The Forum Back to Reviews.

SilverStone Raven RVZ01-E ITX Case Review

We have reviewed a few mini-ITX cases recently. This is the reason why installing the motherboard first and routing the cables around the power supply would create a much neater cabling. Adding the magnetic fan filters would be a little visible where you can see the slightly brownish color of the fan filter’s edges.

I think Silverstone overkilled the length of these cables. Unveiled at CES this year, the latest member to Silverstone’s Raven family quickly gained recognition for being the ultimate Steam Machine enclosure. Here’s how it would look inside the chassis installed without the motherboard installed yet. The plastic panels that cover the chassis are solid and sturdy, it doesn’t bend easily.

It was long enough to hide it along the edge of the chassis. Speak Your Mind Tell us what you’re thinking Sign up for freeit takes 30 seconds.

  BIDAAI DRAMA EPISODE 330

RAVEN by SilverStone – RVZ01

The RVZ01 is indeed a very unique case and the layout explains that a lot. Read on to find out! I tried a laptop optical drive on that slot which does fit in the chassis but the disk bay is different and it will not open and fit on the thin opening in front.

There are several unique accessories that are included with the RVZ Let’s first take a look at the Silverstone RVZ01 on its vertical position. As soon as we installed the PSU, it became apparent that we would need to remove the metal case divider behind it to plug in some of the power cords for the system’s components.

For better cable management, you can hide these long cables around the removable power supply bay as shown in the image above.

PCMag reviews products independentlybut we may earn affiliate commissions from buying links on this page. Here’s a look at the completed graphics card module. That makes it relatively unique among slim cases. All trademarks used are seriws of their respective owners. Opening and dismantling the parts of the Silverstone RVZ01 is far from a typical computer chassis.

As we mentioned earlier, it’s only 4. Although ATX PSUs as deep as mm are supported, SilverStone recommends using power supplies that are mm deep or shallower so you have room for connectors and, possibly, an wilverstone nearby storage drive.

Recommendations for Purchase of New Laptop! Still, it’s worth keeping in mind that you have roughly 3. Later we will show you some size comparison images.

Then install the top clip and secure it with a screw. That is critical if you’re building a living-room PC and want to play high-end games from the comfort of your couch.

Not to mention the unique installation of certain hardware like the graphics card and power supply. What’s great about these fan grills is that they feature external dust filters that snap into place using magnets. A fan grille in the side panel sits just below the PSU for pulling in cool air. With support for large and powerful graphics cards in a chassis of this size, where half-size cards are often the maximum limit, as well as a big focus on air cooling thanks to slim fans, room for a few hard drives, slim optical drive and making good use of the SFX power supply form factor much smaller than ATX power supplies.

Small form factor SFF cases are nothing new, but the subcategory of small-and- thin cases has proven to be a tough needle to thread.

  BOKURA GA ITA EPISODE 1 SUB INDO MP4

Silverstone Raven Z RVZ01 Mini-ITX Case Review – TechSpot

It would be hard to route cables around the hard drive unless you don’t have one installed. SilverStone can’t afford to waste silerstone space in the Raven RVZE, so it uses the channel between the fan and the case wall to route an internal power-supply cord.

Finally there was also an extra Raven logo, this one is curved from left to right and is perfect for when the chassis is stood vertically, while the one that is pre-installed looks better horizontally. That was a reveiw goal, and we’re surely not there yet, but with each new ITX case review we do, and with each new hands-on ITX assembly guide we publish, we get closer to seeing the full picture, and we hope that comes through in our coverage.

February 25, at 9: There’s not much visible changes in the exteriors except for the rvaen and on the left-face where you could see the graphics card inside.

Before we dig any further into the Raven RVE’s interior space, let’s take rvz01g look at its exterior.

Silverstone Raven RVZ01 Mini-ITX Chassis Review

Moving on to building a system with RVZ01, I can’t deny building with this chassis is a bit harder than usual. This is a case that begs for a few well-placed LEDs.

I highly recommend you esries the manual first and understand how it is done. There’s an included fan header splitter cable which is also sleeved. But in terms of portability, the RVZE may in fact be the winner. The 50 Best iPad Games. The three plastic panels look very aggressive and feature the same design found on the much larger RV The Thermalright CPU cooler we used is one we’ve used before.

On the right side is a slot for the slim ODD drive. It wraps completely around the PSU, but its channel is extremely tight. The plastic tray that holds those drives runs the length of the chassis front to back and is held in place by six screws. With the other components installed, we moved to the most interesting step of this system build: